...
You can start the Auto Next Step timer if you wish by clicking on the Auto Next Step button 
. This will start the timer and will show the count down time on the left of the button. Once the timer reaches 0:00, the step value will be advanced to the next step and the timer restarted.
If you are using the Auto Next Step feature, try not to navigate away from the Run Rehearsal page in the browser. This will abort the timer. And when you navigate back to the Run Rehearsal page, the timer will run again but starting from the Step Duration value. You can use another browser tab or browser window as that will not affect the timer.
...
To stop the timer, press the Auto Next Step button again. You can always advance the step by pressing on the Next Step button at any time during the simulation run. If the Auto Next Step timer is running, this will reset the timer after the Next Step button is pressed.
Ending the Rehearsal Simulation
If you wish to end the simulation, click on the Stop Simulation button . This will also disable the Auto Next Step feature if it is in use. The label of the button will switch back to show Start Simulation.
Checking the Simulation Results
You can check the results of the simulation run by opening the Election Results page in a different browser tab or window. For more information, see the topic on Election Results Module in the Elections document.
Here is an example of the Results page showing an active simulation run on rehearsal step 2:
...