Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Current »

Flow users with appropriate permissions, including Switchers and Administrators, can view and access channel management functions. Depending on your Flow user privileges, you may also be limited to managing channels for a particular content group only.

Channels are managed in Flow. From the Home page, select Manage > Channels.

Add New Channel

  1. Click Add A New Channel
  2. Specify channel attributes as described in the following table.
  3. Click Add Now to save your new channel.
 Click here to see an example of the screen.

Channel OptionDetails
Content GroupContent Groups are used to limit access to channels. Each user can be assigned access to 1 or all content groups.
Name

Names the XPression projects used for broadcast. Names must follow file name restrictions for special characters.

IP AddressIdentifies the network address of the XPression server/channel system responsible for generating the output for the channel.

For example: 10.2.255.12.

Port

Identifies the network port of the XPression server/channel system

Defaults to: 65101

Snipe Segment Delay

The number of seconds the system waits after the beginning of each segment before displaying the snipes for that segment.

By default: 30 seconds.

Manage Channels

ActionDescription
Edit Channels
  1. Click Edit to modify an existing channel.  
  2. Modify channel settings as needed.
  3. Click Save Now.  
Remove Channel

Click Remove to remove the channel.

Click OK to confirm.   

Restore Channel

If you remove a channel by mistake, you can restore that channel in Flow.

  1. Select the user you want to restore and click Restore.
  2. Click OK to continue.

In this section:




  • No labels