Use the Weather module to create weather content for any location. Weather topics contain an extensive list of content from highs to lows to forecasts and text descriptions about conditions. Weather data can be provided automatically when a data feed is available. Weather playlists can be created and managed using the Content Control > Weather Playlists module. You can create and manage your weather forecasts in Flow. From the Home page, select Content Control > Weather. 
Add a Location- Start typing the name of a location in the field, or expand the list to select one.
- Click Add Location.
Manage Selected Forecast Location and DetailsYou can manage existing location forecasts at any time as follows: | Action | Details |
|---|
| Select a Location | Select a defined location from the list to manage. 
| | Edit Forecast Location Name | You can change the default name of the location if you prefer to use a different name in the broadcast. The original name will be remembered and can be viewed via the tooltip when hovering over the location name. - Click the edit icon (pencil) beside the location name in the list
- Edit the name
- Click the save icon (check mark)
| | Edit Forecasts For Location | - Click the edit icon (pencil) beside the location name or click Make Changes in the forecast details header
 - For each forecast day (Current, Today, Tonight, Tomorrow/Day 2, Next Day/Day 3, and so on), configure forecast data.
- Click Save.
- Data Source: Manual or Data Feed - See details on manual and data feed configuration in Manage Data Source for Forecast below. You can also set all forecast dates to manual or data feed at once. See Manage Data Source For All Forecasts below.
- Day of the Week - Select a day from the list.
- Part Name - mostly applicable for day part forecasts - used to provide a nice label for displaying the associated weather in the broadcast (Eg. Morning, Afternoon, Evening etc)
- Daytime Condition - Select a daytime condition from the list.
- Nighttime Condition - Select a nighttime condition from the list.
- Visibility - specify the distance and units as appropriate
- Sunrise - time of sunrise for the day forecast
- Sunset - time of the sunset for the day forecast
- Temperature - Enter a temperature.
- Feels like - Enter a temperature if a heat index, relative humidity, or wind chill is affecting the current temperature.
- Dew Point - a temperature
- Wind Direction - Select a wind direction from the list to report on wind conditions and you may also enter the wind direction in degrees
- Speed - Enter a wind speed to report wind conditions.(speed units are set as a system preference)
- Air Quality - provide an air quality rating or statement
- Text - Enter brief, free form text to customize the weather report conditions, such as: Sunny, Partly Cloudy, Snow Flurries, Foggy, Overcast.
- P.O.P. - Enter a probability of precipitation to report precipitation conditions.
- Humidity - enter the humidity percentage
- UV Index - Enter a UV Index, to report on ultraviolet radiation levels, if applicable.
- Air Pressure - specify a value in kPa and optionally a direction of the change
| | Manage Data Source for Forecast | You can configure each forecast day for a manual or automatic data feed. This functionality is most useful for overriding data from the data feed by switching to manual when required.  Indicates a manual feed. When set to manual, even when a data feed exists, this particular forecast is not updated until someone manually updates the data. Click to convert the forecast into a data feed.
 Indicates a data feed. Manual data entry is possible; however, data will be updated by the data feed the next time it automatically updates. This feature allows you to make temporary manual changes before the next update. Click to convert the forecast into a manual feed.
| | Manage Data Source For All Forecasts | You can set all forecasts for the location to manual or automatic data feed at once. Click an icon to toggle all to one feed type or the other. Click OK to confirm. 
| | Remove a Location | Removing a location also removes it from playlists that include that location. Click Remove  to remove the location. Click OK to confirm.
| | Old Data Indicator | A old data indicator light tells you that at least one of your forecast days has stale, out-of-date data that requires your attention.  By default, this icon appears when weather data is more than three (3) hours old, though this stale data value is system configurable (Weather > Hours Before Old) . Contact Bannister Lake Support for assistance. | | Refresh Weather Data | Click Refresh at any time to update the the weather for the locations list. |
Temperature Scale Configurable PreferencesAuto Edit ModeWhen true the forecasts are automatically in edit mode when selected. Distance UnitsThe units used for distances - kilometers (km) or miles (mi) Hours Before OldThe number of hours from the last update before a weather forecast is considered old and flagged. Pressure UnitsThe units used to report barometric pressure - kPa or inHg. Temperature ScaleThe scale can be configured to be either Fahrenheit or Celsius. This is set in the preference module using Preference key = WeatherScale key using F or C as the value.
Wind Speed UnitsThe wind speed units can be either miles or kilometers per hour. (metric or standard) This is set in the preference module using Preference key = WindSpeedUnits and using mph or kph as the value.
|