Page Comparison

...

1. Get a new API key from: “The Weather Company, an IBM Business”

   1. email them at TWCDigitalSupport@us.ibm.com

2. Confirm all your WSI locations have latitude and longitude values assigned by viewing the location list in the WSI Reader 3.x or greater. See below for details…

3. Check if you are using an Extra Data fields and if you are figure out if you have an equivalent field available in the TWC reader.

4. Download and install the latest TWC Reader while the WSI reader continues on

5. Add test locations in the TWC reader – that won’t affect your existing weather uses

   1. See https://bannisterlake.atlassian.net/wiki/spaces/ST/pages/1612546079/The+Weather+Company+Reader#Locations for details

6. Map the TWC API icons to your existing icons in Flow

   1. See below for details…

7. Confirm data is available and looks good

   1. Test the output in a test show if you can

8. Pause the WSI and TWC Readers.

9. Remove the test locations from the TWC Reader.

10. Switch existing WSI locations to be updated by the TWC reader

    1. See below for details…

11. Restart the TWC reader.

12. Shut down the WSI reader

    1. it has nothing to do now anyway since we just gave all its locations to TWC

13. In Flow - Weather - Configuration - Codes module set TWC as your new default Data Source.

...